576 Pews Bodies 17.0” 22.5” 4.875” 15.5” 14.375” 31.125” 33.0” 16.625” 1.125” 18.5” 12.5” 21.875” 4.875” 16.875” 31.25” 33.0” 16.625” 0.75” 18.5” 12.5” 22.875” 4.875” 16.875” 31.25” 33.0” 16.625” 0.75” 101 Solid wood seat and back Seats are machined from 6/4 lumber (1.50” raw lumber thickness). Final thickness will be approximately 1-3/16”. Seats have a scooped out contoured area for comfort. Boards are glued up with tongue and groove construction. Seats are reinforced underneath with a 1.5” thickness x 2.5” height lateral brace. Backs are machined from 4/4 lumber (1” raw lumber thickness). Final thickness will be approzimately .75”. Boards are glued up with tongue and groove construction. The cap rail is fastened to the pew back with tongue and groove construction. 102 Padded seat and wood back Seats are manufactured with a .75” veneer core plywood base with solid poplar rails across the front and back for support and anchoring. Foam is 4” thickness with 2.6# density and 45 – 48# compression ratio. Many fabrics are available for a covering. Backs are machined from 4/4 lumber (1” raw lumber thickness). Final thickness will be approzimately .75”. Boards are glued up with tongue and groove construction. The cap rail is fastened to the pew back with tongue and groove construction. 103 Padded seat and back Seats are manufactured with a .75” veneer core plywood base with solid poplar rails across the front and back for support and anchoring. Foam is 4” thickness with 2.6# density and 45 – 48# compression ratio. Many fabrics are available for a covering. Backs are machined from 4/4 lumber (1” raw lumber thickness). Final thickness will be approzimately .75”. Boards are glued up with tongue and groove construction. The cap rail is fastened to the pew back with tongue and groove construction. The front of the pew back is covered with 1” foam and fabric which are removable for recovering at a future date. Pew seats, backs and ends can be manufactured in various combinations to meet your specific requirements. We offer three basic pew body designs which follow:
RkJQdWJsaXNoZXIy NDI2MjY1