Slide Sledge Operating Manual

© 20 17 , Slide Sledge, LLC 15 4. How To Use the Slide Sledge ™ Multi-Head ™ Hammer How to use the Slide Sledge ™ Multi-Head ™ Hammer Bucket Tooth Pin Removers 1. Place tip with set screw on flat side of hammer tip and push the tip onto the hammer until it cannot be inserted any further. NOTE: Use CHART 2 of this manual to determine the proper tip for you application. Do not exceed the upper range of the intended application as described in CHART 2 WARNING: Always refer to the original equipment manufacturers’ procedures for installation or removal of equipment. Follow all manufacturers’ safety procedures. Hammer Union Tip 2. Make sure the pin driver tip is aligned with the pin and the pin driver tip is parallel with the striking surface of the pin. The pin driver post should be in a horizontal line to the pin and not at an angle to the pin.