Slide Sledge Operating Manual

© 20 17 , Slide Sledge, LLC 23 4. How To Use the Slide Sledge ™ Multi-Head ™ Hammer 1. Users will often want to attach the optional 5 Pound Handle Weight to the Slide Sledge™ Multi-Head™ hammer to increase the driving force of the tool and to allow for a more comfortable hand position. To add the 5 Pound Handle Weight, start by removing the drive bar thread cap located on the drive bar. 2. After unscrewing the drive bar thread cap, remove and place in a secure area. Do not lose the drive bar thread cap. You will need this cap to protect the threads when the 5 Pound Handle Weight is not in use. 3.Take hold of the 5 Pound Handle Weight and align it with the threaded end of the drive bar. Hold the drive bar securely and start to thread the 5 Pound Handle Weight onto the drive bar in a clockwise motion. 4.The 5 Pound Handle Weight is properly attached to the drive bar when it bottoms out on the main body of the drive bar. Be sure that the 5 Pound Handle Weight is seated fully prior to use. Note: Reverse the procedure to remove the 5 Pound Handle Weight. How to attach the 5 Pound H andle W eight to the Slide Sledge ™ Multi- Head ™ Hammer WARNING: Always refer to the original equipment manufacturers’ procedures for installation or removal of equipment. Follow all manufacturers’ safety procedures.