Slide Sledge Operating Manual

© 20 17 , Slide Sledge, LLC 5 3. Product Components and Applications Tip Selection A full range of application specific tips are available for use with the Slide Sledge ™ Multi-Head ™ hammer. These tips have been engineered and tested for use with the Slide Sledge ™ Multi- Head ™ tools. Use only Slide Sledge ™ Multi-Head ™ tips with the Slide Sledge ™ Multi-Head ™ hammer and do not alter the tips from their original condition as furnished by Slide Sledge ® in any way. CHART 2, shown on the next page, lists all of the Slide Sledge ™ Multi-Head ™ hammer tips available today and lists each tip’s intended application. Each tip was designed for a specific application. Do not exceed the upper range of the intended application as described in the chart provided. Doing so will increase the risk of tip breakage and void the tip’s warranty. For example, the 3/8" bucket tooth pin remover was designed to fit between the bucket teeth on smaller sized buckets and remove smaller bucket tooth pins, up to 1/2" in diameter. To accomplish this task, the 3/8" bucket tooth pin remover is smaller in gauge, thickness, and length. If the 3/8" bucket tooth pin remover is used to remove large pins over 1/2" in diameter, the life of the tip will be greatly reduced and the risk of breakage will greatly increase.