Slide Sledge Operating Manual

© 20 17 , Slide Sledge, LLC 9 4. How To Use the Slide Sledge ® Multi-Head ™ Hammer How to use the Slide Sledge ® Multi-Head ™ Slide Lock The Slide Sledge ™ Multi-Head ™ slide lock stops the drive bar from sliding out of the drive bar tube when the tool is not in use. This is especially important during transportation. Please make sure that the slide lock is engaged when the tool is not in use to increase your safety and the safety of bystanders. 1.To release the drive bar, pull on the slide lock pin until it releases from the drive bar groove and pull the drive bar back. The slide lock will not re-engage while the tip of the tool is held firmly against the desired impact point. 2.To re-engage the slide lock mechanism, push the drive bar into the drive bar tube until the slide lock pin re-inserts itself into the drive bar groove. Please note that the slide lock position pin must be aligned with the groove cut in the slide lock nut to allow for drive bar locking. Drive Bar Groove Slide Lock Pin Slide Lock Nut Groove Slide Lock Position Pin WARNING: Always engage the slide lock when tool is not in use. WARNING: Always refer to the original equipment manufacturers’ procedures for installation or removal of equipment. Follow all manufacturers’ safety procedures.